Regime Analysis of Critical Raindrop Diameters for Rainfall Attenuation in Southern Africa

O Adetan, OO Obiyemi


The influence of critical raindrop diameters on the specific rainfall attenuation in Durban (29o52'S, 30o58'E), South Africa using various rainfall regimes is analyzed in this paper. Different rain rate values representing drizzle, widespread, shower and thunderstorm are selected for the purpose of analysis over the measured raindrop size distribution. The three-parameter lognormal and gamma DSD models with shape parameter of 2 are used to estimate the parameters required to investigate the drop sizes which produce a major contribution to the total specific rainfall attenuation for the selected rain rate values. The computed total specific attenuation increases with increasing frequencies and rain rates. The highest and prevailing contribution to the specific attenuation occurs at for the stratiform (drizzle or widespread) and convective (shower or thunderstorm) rain types for the models considered. The total percentage fraction formed by drops in the diameter range 0.5 mm ≤ D ≤ 2.5 mm and 1.0 mm ≤ D ≤ 3.0 mm are found to be most critical for the specific rain attenuation for the stratiform (drizzle and widespread)  and convective (shower and thunderstorm) rainfall types especially at higher frequencies.


Drop size distribution, Raindrop critical diameters, Specific rainfall attenuation, Lognormal model, Gamma model

Full Text:




  • There are currently no refbacks.

Bulletin of EEI Stats

Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191, e-ISSN: 2302-9285
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).