High-gain and broadband 1×4 rectangular microstrip antenna array for 28 GHz 5G applications
Abstract
Millimeter-wave (mmWave) communication systems at 28 GHz are key to fifth generation (5G) networks due to their high bandwidth and data rates. However, mmWave signals suffer from severe propagation losses, which demand antenna systems capable of providing high gain while maintaining a broad impedance bandwidth. This work presents a compact four-element rectangular microstrip antenna array fabricated on a Rogers RT5880 substrate (er=2.2, thickness=0.45 mm, and tan d=0.0009), designed to operate at 28 GHz. The antenna achieves approximately 14 dBi gain and an impedance bandwidth close to 1 GHz. Radiation patterns demonstrate stable directional performance and high efficiency. The results obtained highlight the suitability of the proposed antenna array as a compact and efficient solution for 5G mobile terminals and small-scale base station applications.
Keywords
28 GHz frequency band; 5G millimeter-wave communications; Antenna array design; High-gain microstrip antenna; Rectangular patch antenna
Full Text:
PDFDOI: https://doi.org/10.11591/eei.v15i6.12034
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191
,
e-ISSN: 2302-9285
This journal is published by the
Institute of Advanced Engineering and Science (IAES)
.