Study of the efficiency of a vortex wind turbine with an airflow concentrator
Abstract
This study investigates the aerodynamic performance of a vertical-axis vortex wind turbine equipped with a multi-channel airflow concentrator formed by logarithmically curved guide surfaces. The objective is to enhance airflow acceleration and controlled vortex formation under low-wind-speed conditions. Three-dimensional Reynolds-averaged Navier-Stokes (RANS) simulations with the standard k-epsilon turbulence model were used to analyze the flow field and turbine performance. At an inlet velocity of 2 m/s, the two-channel inflow condition produced a velocity amplification of approximately 10–12 times, corresponding to an outlet velocity of 20–24 m/s. The energy-performance analysis yielded a maximum estimated power coefficient of Cp=0.31 at a tip-speed ratio (TSR) of 1.25, corresponding to a rotor speed of 44.5 rpm, torque of 0.33 N·m, and mechanical output power of 1.55 W. The results demonstrate that logarithmically curved guide channels can combine airflow concentration with tangential flow generation and provide a distinct optimum operating region. The findings demonstrate the aerodynamic potential of the proposed concept, while wind-tunnel validation is required to confirm its practical performance.
Keywords
Flow concentrator; Mathematical modeling; Renewable energy; Vortex wind turbine; Wind power
Full Text:
PDFDOI: https://doi.org/10.11591/eei.v15i6.12509
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191
,
e-ISSN: 2302-9285
This journal is published by the
Institute of Advanced Engineering and Science (IAES)
.