Use of scanning devices for object 3D reconstruction by photogrammetry and visualization in virtual reality

Irena Drofova, Wei Guo, Haozhou Wang, Milan Adamek

Abstract


This article aims to compare two different scanning devices (360 camera and digital single lens reflex (DSLR) camera) and their properties in the three-dimensional (3D) reconstruction of the object by the photogrammetry method. The article first describes the various stages of the process of 3D modeling and reconstruction of the object. A point cloud generated to the 3D model of the object, including textures, is created in the following steps. The scanning devices are compared under the same conditions and time from capturing the image of a real object to its 3D reconstruction. The attributes of the scanned image of the recon-structed 3D model, which is a mandarin tree in a citrus greenhouse in a daylight environment, are also compared. Both created models are also compared visually. That visual comparison reveals the possibilities in the application of both scanning devices can be found in the process of 3D reconstruction of the object by photogrammetry. The results of this research can be applied in the field of 3D modeling of a real object using 3D models in virtual reality, 3D printing, 3D visualization, image analysis, and 3D online presentation.


Keywords


3D model; 3D reconstruction; Image processing; Photogrammetry; Point cloud; Virtual reality

Full Text:

PDF


DOI: https://doi.org/10.11591/eei.v12i2.4584

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Bulletin of EEI Stats

Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191, e-ISSN: 2302-9285
This journal is published by the Institute of Advanced Engineering and Science (IAES) in collaboration with Intelektual Pustaka Media Utama (IPMU).