Observer-based non-singular terminal sliding mode control for robust regulation of high-gain DC–DC converters
Abstract
High-gain capacitor-based boost converters (HG-CBCs) require robust voltage regulation despite nonlinear internal coupling, parameter variations, and limited feedback sensing. An output-feedback architecture is developed by combining a signed-power non-singular terminal sliding mode controller (NTSMC) with a linear extended state observer (LESO), which reconstructs the output-voltage derivative and lumped output-channel dynamics from the measured voltage alone. The stability analysis separates finite-time tracking on the ideal sliding manifold from the practical bounded response introduced by observer error and the saturation layer. Real-time implementation on a TMS320F28379D digital signal processor (DSP) demonstrates stable regulation under both steady-state and step-reference operation. At reference voltages of 40 V, 47 V, 57 V, and 87 V, the LESO–NTSMC limits output-voltage ripple to 6.7–8.9%, compared with 9.9–15.1% for conventional sliding mode control (SMC), corresponding to a 31–41% reduction. The experiments further show an average efficiency of 88.7% while requiring only output-voltage feedback, supporting a reduced-sensing solution for high-gain direct current to direct current (DC–DC) conversion in low-voltage renewable energy systems.
Keywords
Disturbance rejection; Energy conversion systems; High-performance control; Observer-based control; Renewable energy system; Robust control
Full Text:
PDFDOI: https://doi.org/10.11591/eei.v15i6.13104
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191
,
e-ISSN: 2302-9285
This journal is published by the
Institute of Advanced Engineering and Science (IAES)
.