Human eye simulation interaction with electromagnetic wave using COMSOL software
Abstract
The increasing ubiquity of electronic devices necessitates a detailed understanding of the potential electromagnetic (EM) and thermal hazards posed to sensitive biological tissues, such as the human eye. To achieve this, a realistic three-dimensional (3D) model of the human eye was constructed, incorporating the specific dielectric and thermal properties of its various layers, including a structurally accurate lens domain. The lens geometry was precisely meshed using a swept mesh technique to ensure high numerical accuracy, particularly in resolving the thermal gradients across its thickness. The simulation was carried out using the COMSOL multiphysics finite element method (FEM) environment. The radio frequency (RF) module was employed to solve Maxwell's equations and determine the EM field distribution and the associated power losses within the tissues at the operating frequency of f=2.45 GHz. Subsequently, a bio-heat transfer analysis was performed, starting from a baseline temperature of 37 °C, to calculate the induced thermal elevation under the applied EM exposure conditions. The simulation results accurately pinpointed the critical areas receiving the highest power density, revealing a peak localized temperature rise of 0.2 °C to be 37.2 °C maximum temperature reading.
Keywords
Biomedical simulation; Electromagnetic waves; Human eye model; Ocular tissue heating; Specific absorption rate distribution
Full Text:
PDFDOI: https://doi.org/10.11591/eei.v15i6.13821
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Bulletin of Electrical Engineering and Informatics (BEEI)
ISSN: 2089-3191
,
e-ISSN: 2302-9285
This journal is published by the
Institute of Advanced Engineering and Science (IAES)
.