Improving the optical efficiency of white light-emitting diodes based on phosphor-in-glass by a dual-layer remote phosphorus structure with the application of LiLaO2:Eu3+ and CaSO4:Ce3+,Mn2+

Nguyen Thi My Hanh

Abstract


While the remote phosphor structure is not an appropriate solution for WLED color uniformity, it is more advantageous for the luminous output of WLED than the conformal phosphor or in-cup phosphor structure. Acknowledging the ability of the remote phosphor structure, many studies have been carried out to surmount the color quality disadvantage of this structure. A dual-layer remote phosphor configuration is proposed in this research paper to acquire better color quality for WLEDs through heightening the color rendering index (CRI) and the color quality scale (CQS). The color temperature of the WLED packages this study is 8500 K. By inserting a layer of green CaSO4:Ce3+,Mn2+ or red LiLaO2:Eu3+ phosphor on the yellow YAG:Ce3+ phosphor layer, the phosphor structure configuration can be constructed. Then, to get the best color quality, the concentration of added phosphor LiLaO2:Eu3+ would be changed. The findings showed the rise of CRI and CQS along with the LiLaO2:Eu3+, which implies the influence of LiLaO2:Eu3+ to the growth of red light components within WLEDs packages. The greater the concentration of LiLaO2:Eu3+ is, the more the CRI and CQS increase. Meanwhile, the luminous flux gains from the green phosphor CaSO4:Ce3+,Mn2+. Nevertheless, the luminous flux and color quality would decrease if the concentrations of both red LiLaO2:Eu3+ and green CaSO4:Ce3+,Mn2+ phosphors reach a certain corresponding level. Centered on the Mie-scattering theory and the law of Lambert-Beer, this result is illustrated. The findings in this research are vital references for manufacturing WLEDs with higher white light performance.

Keywords


WLEDs, CaSO4:Ce3+,Mn2+, LiLaO2:Eu3+, Lumen output, Color quality, Mie-scattering theory

References


G. Tan, et al., "High dynamic range liquid crystal displays with a mini-LED backlight," Opt. Express, vol. 26, pp. 16572-16584, 2018.

W. Wang, et al., "Red photoluminescent Eu3+-doped Y2O3 nanospheres for LED-phosphor applications: Synthesis and characterization," Opt. Express, vol. 26, pp. 34820-34829, 2018.

Chen, et al., Flexible/curved backlight module with quantum-dots microstructure array for liquid crystal displays," Opt. Express, vol. 26, pp. 3466-3482, 2018.

Z. Li, et al., "Effect of flip-chip height on the optical performance of conformal white-light-emitting diodes," Opt. Lett, vol. 43, pp. 1015-1018, 2018.

Y. F. Huang, et al., "Red/green/blue LD mixed white-light communication at 6500K with divergent diffuser optimization," Opt. Express, vol. 26, pp. 23397-23410, 2018.

S. Bindai, et al., "Realization of phosphor-in-glass thin film on soda-lime silicate glass with low sintering temperature for high color rendering white LEDs," Appl. Opt, vol. 58, pp. 2372-2381, 2019.

K. Tsai, et al., "Exposure study on UV-induced degradation of PTFE and ceramic optical diffusers," Appl. Opt, vol. 58, pp. 1215-1222, 2019.

I. G. Palchikova, et al., "Quantization noise as a determinant for color thresholds in machine vision," J. Opt. Soc. Am. A, vol. 35, pp. B214-B222, 2018.

H. Lee, et al., "Color-tunable organic light-emitting diodes with vertically stacked blue, green, and red colors for lighting and display applications," Opt. Express, vol. 26, pp. 18351-18361, 2018.

J. Ji, et al., "Theoretical analysis of a white-light LED array based on a GaN nanorod structure," Appl. Opt, vol. 59, pp. 2345-2351, 2020.

Zhang, et al., "Rapid, large-scale stimulated Raman histology with strip mosaicing and dual-phase detection," Biomed. Opt. Express, vol. 9, pp. 2604-2613, 2018.

Bai, et al., "Full-color optically-sectioned imaging by wide-field microscopy via deep-learning," Biomed. Opt. Express, vol. 11, pp. 2619-2632, 2020.

Y. Wu, et al., "Monolithic integration of MoS2-based visible detectors and GaN-based UV detectors," Photon. Res, vol. 7, pp. 1127-1133, 2019.

M. Royer, "Evaluating tradeoffs between energy efficiency and color rendition," OSA Continuum, vol. 2, pp. 2308-2327, 2019.

A. Kaminari, et al., "Linking Infrared Spectra of Laboratory Iron Gall Inks Based on Traditional Recipes with their Material Components," Appl. Spectros, vol. 72, pp. 1511-1527, 2018.

L. Xu, et al., "Color gamut mapping between small and large color gamuts: part II. gamut extension," Opt. Express, vol. 26, pp. 17335-17349, 2018.

Zhang, et al., "Mn4+-doped fluoride phosphors rapidly synthesized by ball milling," Opt. Mater. Express, vol. 8, pp. 73-81, 2018.

Li, et al., "High-efficiency cubic-phased blue-emitting Ba3Lu2B6O15:Ce3+ phosphors for ultraviolet-excited white-light-emitting diodes," Opt. Lett, vol. 43, pp. 5138-5141, 2018.

P. P. Li, et al., "Unveiling of control on the polarization of supercontinuum spectra based on ultrafast birefringence induced by filamentation," J. Opt. Soc. Am. B, vol. 35, pp. 2916-2922, 2018.

X. Wang, et al., "Modifying phase, shape and optical thermometry of NaGdF4:2%Er3+ phosphors through Ca2+ doping," Opt. Express, vol. 26, pp. 21950-21959, 2018.

S, Kumar, et al., "Extended light-source-based lensless microscopy using constrained and regularized reconstruction," Appl. Opt, vol. 58, pp. 509-516, 2019.




DOI: https://doi.org/10.11591/eei.v10i4.2904

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Bulletin of EEI Stats